Heavy Duty Services: Engine Overhaul & Replacement

HOME > SERVICES OFFERED > ENGINE & TRANSMISSION

For the big jobs, take your vehicle to Fort Mitchell Garage! Our expert services are ideal whether you have a late model import or newer domestic vehicle. And because we guarantee the work we perform, you can rest assured you are receiving the highest quality engine overhaul and replacement services in the Park Hills, KY 41011 area.

Our heavy duty services include:

Engine Maintenance
Any car part manufacturer will tell you that preventive maintenance is critical to the part's lifespan. Like other auto parts, car engines aren't built to last forever. However, you can increase the engine's lifespan by performing regular preventive maintenance. The easiest way to maintain peak performance and fuel economy is to provide regular engine maintenance for your vehicle. To have your engine maintained by experts, visit Fort Mitchell Garage.

Transmission Replacement
In motor vehicles, the transmission usually refers to the gear box, which uses gears and gear trains to transmit speed and tourque from a rotating power source to another device. You can have your car's transmission replaced with a new, rebuilt, remanufactured, repaired or used transmission. For more information contact Fort Mitchell Garage in Park Hills, KY. Our experienced service technicians can help you make the best decision for your vehicle and your wallet.

Transmission Repair and Rebuild
When it comes to automatic transmission repair, there are several options: buying a new one, buying a remanufactured one or having yours rebuilt. Each of the above options has its own share of advantages and disadvantages. Of the three options, rebuilt transmissions are the most economical. A rebuilt transmission involves removing the transmission from the car, disassembling it, replacing worn out parts, reassembling it, and then reinstalling it. To have this done by specialists, call 859-431-3326 to talk to the mechanics of Fort Mitchell Garage today.

Timing Belt
A timing belt is a part of your car's internal combustion engine. The belt synchronizes the camshaft and the crankshaft rotation so that the engine valves open and close at the correct timings. Also, the belt prevents the piston from striking the valves in an interference engine. A timing Belt is a rubber belt that usually features teeth on the inside service, while a timing chain is a metal roller chain. Most cars we drive now have timing belts instead of timing chains and gears. Although different manufacturers have their recommended mileage, you need to have your car's timing belt checked regularly. To have it checked by experts, contact Fort Mitchell Garage today.

Associations

  • Federated Auto Parts
  • IDENTIFIX
  • IATN (International Automotive Technicians' Network)
  • ASE Master Technician
  • NFIB (National Federation of Independent Business)
  • ALL-DATA
  • Ac Delco
  • ASC
  • Motorcraft
  • Car Care Aware

Vehicle Tips

  • According to recent studies, 5 percent of all motor vehicle fatalities are clearly caused by automobile maintenance neglect.
  • The cooling system should be completely flushed and refilled about every 24 months. The level, condition, and concentration of coolant should be checked. (A 50/50 mix of anti-freeze and water is usually recommended.)
  • Never remove the radiator cap until the engine has thoroughly cooled. The tightness and condition of drive belts, clamps and hoses should be checked by a pro.
  • Change your oil and oil filter as specified in your manual, or more often (every 3,000 miles) if you make frequent short jaunts, extended trips with lots of luggage or tow a trailer.
  • Replace other filters (air, fuel, PCV, etc.) as recommended, or more often in dusty conditions. Get engine drivability problems (hard stops, rough idling, stalling, diminished power, etc.) corrected at a good shop.
  • A dirty windshield causes eye fatigue and can pose a safety hazard. Replace worn blades and get plenty of windshield washer solvent.
  • Have your tires rotated about every 5,000 miles. Check tire pressures once a month; let the tires cool down first. Don't forget your spare and be sure your jack is in good condition.
  • Check your owner's manual to find out what fuel octane rating your car's engine needs then buy it.
  • Keep your tires inflated to the proper levels. Under-inflated tires make it harder for your car to move down the road, which means your engine uses more fuel to maintain speed.
  • Lighten the load. Heavier vehicles use more fuel, so clean out unnecessary weight in the passenger compartment or trunk before you hit the road.
  • Use the A/C sparingly. The air conditioner puts extra load on the engine forcing more fuel to be used.
  • Keep your windows closed. Wide-open windows, especially at highway speeds, increase aerodynamic drag and the result is up to a 10% decrease in fuel economy.
  • Avoid long idling. If you anticipate being stopped for more than one minute, shut off the car. Contrary to popular belief, restarting the car uses less fuel than letting it idle.
  • Stay within posted speed limits. The faster you drive, the more fuel you use. For example, driving at 65 miles per hour (mph) rather than 55 mph, increases fuel consumption by 20 percent.
  • Use cruise control. Using cruise control on highway trips can help you maintain a constant speed and, in most cases, reduce your fuel consumption.
  • Keep your engine tuned. A fouled spark plug or plugged/restricted fuel injector can reduce fuel efficiency as much as 30 percent.
  • Inspect the engine's belts regularly. Look for cracks or missing sections or segments. Worn belts will affect the engine performance.
  • Have the fuel filter changed every 10,000 miles to prevent rust, dirt and other impurities from entering the fuel system.
  • Change the transmission fluid and filter every 15,000 to 18,000 miles. This will protect the precision-crafted components of the transmission/transaxle.
  • Inspect the suspension system regularly. This will extend the life of the vehicle's tires.